Auto stop ind-ud / limit switch

Beskrivelse

Ifølge reglerne for CE standarder bør wincher med kapacitet på mere end 1000 kg udstyres med automatisk stop ind/ud.
“Principles CE requirements:

1. Any motion which has a designed restriction of movement shall be provided with motion limiters. The inner and outer limit of a lifting winch are normally limited with a spindle limit switch with 2 contacts.  
2. Moving or turning transmissions and parts shall be designed, positioned or guarded in order  to protect against the risks associated with possible contact of exposed persons during the intended use. (when located in an easily accessible position)    
3. Winches for lifting, lowering and pulling purposes with a rated capacity of 1.000kg or more shall be fitted with a rated capacity limiter.”  

Laubjerg Vinsch tilbyder limit switches på spil som vi producerer hos Marotek.
Alle tilbud på spil med kapacitet på 1000kg og opefter indeholder en mulighed for at tilvælge denne funktion.

PF2C Rotary Limit Switch fungerar på detta sätt:

The rotary limit switch is used to control the movement of industrial machinery. It operates as an
auxiliary controller of electrical motors through a power interface, such as a contactor or PLC. Suitable for
heavy duty, its shaft is connected to the motor and, after a set number of revolutions, the cams operate the
switches, thus starting the predetermined movement. A worm gear and a helical toothed gear combined with
one or more pairs of straight toothed gears are used for the transmission of the movement from the input
shaft to the output shaft.